What is art? Critics and thinkers are complimentary to discuss the concern endlessly, but we think it’s quite basic: If there’s a frame around it, then it’s art! Less basic– but not so intricate that you shouldn’t give it a try– is constructing your own picture frame. Starting woodworkers love this job, and for lots of others it can be a terrific money-saver. Within just a weekend, offered you have access to a couple of standard tools, you can make a picture frame sealing tape to keep for the rest of your life.
TOOLS & PRODUCTS
Table sawMiter sawWood routerMeasuring tapeWood glueHammerBrad nailsSandpaperPaintWood stainLinseed oil
Available at AmazonWe participate in the Amazon Solutions LLC Associates Program, an affiliate marketing program created to supply a way for us to make charges by linking to Amazon.com and associated websites.
The following actions apply in a general method no matter what kind of wood you want to utilize (or take place to have on hand), or what size you would like the picture frame to be. But for the sake of simplicity in this tutorial, we’ll assume that you intend to construct an 11 ″ x 14 ″ picture frame from a 1 ″ x 4 ″ maple board that determines 4 feet long.
Action 1
Setting the table saw at 1-1/2 ″ (from the blade to the fence) bear claw picture hangers, rip the wood board into 2 4-foot-long pieces. These should be exactly the same width, so pass the larger of the two through the table saw a second time. (Naturally, if you ‘d wanted the frame larger or narrower, you would have set the table saw appropriately.).
Action 2.
With a router, cut a 1/2 ″ x 1/2 ″ rabbet– that is, a rectilinear groove– along one of the long sides of each of the two pieces. The picture is going to lie against the rabbet, so if you expect to frame an product (or to utilize a mat) of substantial thickness, accommodate it by developing a more generous rabbet.
Action 3.
Utilize a miter saw to cut one end of both boards at a 45-degree angle, taking care to ensure that the rabbet runs along what is to end up being the within the frame. In other words, once you have actually ended up cutting an angle into each board, the rabbeted edges should be opposite the longer (and pointier) side.
Step 4.
Measure the longer side of the picture you are going to frame; include 1/16 ″ to that measurement. Then pick one of the two boards and move that total measurement to its rabbeted side, marking the distance. Here, cut a 45-degree angle, this time in the instructions opposite to the initial angled cut. Next, position the second board over the one into which you’ve recently cut a second angle. Mark the second board, then cut it so that you have a pair of identical pieces. On the two remaining pieces, repeat the procedure of measuring, marking, and cutting, this time utilizing as a guide the much shorter side of the picture to be framed. Make certain you’re keeping the rabbeted side to the within the frame.
Step 5.
Assemble the 4 pieces into a rectangular shape, keeping in mind constantly to place the rabbet groove to the within. Dab wood glue onto each joint, then secure the pieces together by means of brad nails. 2 nails near to each outside corner should suffice. Wipe away any excess glue immediately. Let dry over night.
Action 6.
Sand the picture frame picture framing security hardware, then wipe away any sawdust with a moist fabric. When you have actually permitted sufficient time for the wood to dry totally, it’s safe to apply your option of finish. (If you’re constructing with attractive lumber, I suggest finishing with linseed oil.) Having actually ended up the piece, turn it over so the back (rabbeted) side is facing up. Fit a piece of cut-to-size glass into the frame, then lay the picture face down on the glass and place a support over it. You have several choices for securing whatever in place, consisting of glazing points or brads.
Congratulations, you’ve developed a work of art: You might even decide to leave the picture out entirely, because the frame itself is such a masterpiece!